免砸砖防水施工步骤
Waterproof construction steps without smashing bricks
1. 施工前准备：清理施工区域，确保地面干燥、平整。检查地面裂缝或其他潜在渗水区域，以便进行修补。选择合适的防水材料和施工工具，并确保安全防护措施到位。
1. Preparation before construction: Clean the construction area to ensure that the ground is dry and level. Check for ground cracks or other potential water seepage areas for repair. Select appropriate waterproof materials and construction tools, and ensure that safety protection measures are in place.
2. 基础处理：使用底漆、型槽模具 一次性止血带 保定水处理设备 一次性止血带 保定空压机 北京真空泵防水涂料等基础处理材料，对地面和墙面进行预处理。确保表面平整、光滑，以提高防水材料的附着效果。
2. Basic treatment: Use primer, waterproof coating and other basic treatment materials to pre-treat the ground and walls. Ensure a flat and smooth surface to improve the adhesion effect of waterproof materials.
3. 铺设瓷砖或大理石：根据设计要求，在地面上铺设瓷砖或大理石等硬质材料，并进行找平处理。确保材料铺设规范，达到美观效果。
3. Laying ceramic tiles or marble: According to the design requirements, lay hard materials such as ceramic tiles or marble on the ground and perform leveling treatment. Ensure standardized material laying and achieve aesthetic results.
4. 涂抹免砸砖专用底漆：在瓷砖或大理石表面涂抹免砸砖专用底漆，确保涂刷均匀、无遗漏。底漆干燥后，进行下一道工序。
4. Apply the special primer for anti impact bricks: Apply the special primer for anti impact bricks on the surface of ceramic tiles or marble to ensure uniform and no omissions. After the primer dries, proceed to the next process.
5. 涂抹防水涂层：在底漆表面涂抹防水涂层，注意涂刷均匀、无气泡。根据设计要求，可能需要涂抹多层防水涂层，以确保防水效果。
5. Application of waterproof coating: Apply a waterproof coating on the surface of the primer, paying attention to evenly brushing without bubbles. According to design requirements, it may be necessary to apply multiple layers of waterproof coatings to ensure waterproofing effectiveness.
6. 清理与验收：待防水涂层干燥后，进行表面清理，确保无残留物。对施工区域进行验收，检查防水效果。如有需要，及时进行修补或重新施工。
6. Cleaning and acceptance: After the waterproof coating is dry, carry out surface cleaning to ensure that there is no residue. Conduct acceptance of the construction area and check the waterproofing effect. If necessary, repair or rebuild in a timely manner.
